|
Create Your Own DeltaHawk Virtual Engine Installation
Using CAD Models of the Upright and Inverted Engines you can install a virtual engine in your virtual airframe to answer the burning question of, “will it fit?” Schematic diagrams of
Cooling, Lubrication and Fuel systems indicate what might be used in a typical installation. Dimensioned drawings showing engine mount locations and engine center of gravity are provided for the drafting board set
as well. A chart is posted showing equipment and components that might be suitable for a typical DeltaHawk engine installation. The information is posted on an FTP site that permits downloading large electronic files.
CAD Models
Models of the basic V-4 engine, inverted exhaust system and upright exhaust system are posted on the FTP site. Users will need to download the base engine and the appropriate exhaust system to create a CAD
assembly of the complete engine they want to use. The CAD files are available in both STEP or IGES formats.
AVAILABLE FILES ON THE FTP SITE
PDF & JPG files are available directly on this web site - just click on name
- Installation_Equipment.pdf
A chart showing equipment and components that might be suitable for a typical DeltaHawk engine installation.
- COG0800.jpg
Dimensioned drawing showing engine center of gravity
- diagram_fuel.pdf
Schematic diagram of Fuel system indicating what might be used in a typical installation.
- diagram_oil.pdf
Schematic diagram of Lubrication system indicating what might be used in a typical installation.
- diagram_water.pdf
Schematic diagram of Cooling system indicating what might be used in a typical installation.
- Solid_V4_Engine_IGES.zip
Solid Model of base engine without exhaust system in IGES format. Use this model with the appropriate exhaust system to create either an
upright or inverted assembly
- Solid_V4_Engine_STEP.zip
Solid Model of base engine without exhaust system in STEP format. Use this model with the appropriate exhaust system to create either an upright or
inverted assembly
- Upright_Exhaust_IGES.zip
Use this file with Solid_V4_Engine_IGES for Upright DeltaHawk engine
- Upright_Exhaust_STEP.zip
Use this file with Solid_V4_Engine_STEP for Upright DeltaHawk engine
- Inverted_Exhaust_IGES.zip
Use this file with Solid_V4_Engine_IGES for Inverted DeltaHawk engine
- Inverted_Exhaust_STEP.zip
Use this file with Solid_V4_Engine_STEP for Inverted DeltaHawk engine
- These are drawing files for 2-dimensional programs like AutoCAD
- DH160 A4_Back.dxf
- DH160 A4_Bottom.dxf
- DH160 A4_Front.dxf
- DH160 A4_Left.dxf
- DH160 A4_Right.dxf
- DH160 A4_Top.dxf
|
